Remote Control Duplicator (ALL REMOTES)

MAKE multiple remotes functions Into a single remote!! Duplicate any remotes!! Super convenient!! Cars, sunroofs, garage doors, rolling gates, heating systems, wireless anti-theft devices, home automation...

Super Safety & Secured!! This duplicator adopts one-to-one key copy technology and the password of each key is saved individually!! No possibility to mess up!! 

Make a copy of any key in a few seconds through simple steps and be prepared for any possible button breaks!!

Features

 ★★★[DUPLICATION OF ANY REMOTES]
 Duplicate existing remote controllers for cars, car sunroofs, garage doors, gate doors, heating systems, home automation e.g. lighting and etc.

★★★[ABCD FOUR BUTTONS]
Super Convenient!! 1 remote = 4 remotes!! Respectively copy four different types of chips and so operate four different types of facilities!! FOUR storage site for 4 different remotes!! 
★★★[ FIXED FREQUENCY] 
Works for 315 / 433MHz fixed codes and learning codes; transmit distance is 50-100m (open space)
 ★★★[Super Secured & Safe to use]
This duplicator adopts one-to-one key copy technology and the password of each key is saved individually!! No possibility to mess up!! Password of each key is saved individually and is reliable!!
★★★[ PORTABLE HUMANIZED DESIGN] 
Handy key chain size attached to your car keys. Button slide cover to protect buttons from accidental unplanned operation!!

INSTRUCTION

TO CLEAR CODE:

1. Press button A&B at the same time, in about 2 seconds the LED light will flash 3 times and then go out.
2. Release button B at the same time, the button A continues to hold, don't release.
3. Press button B for 3 times, then you can see the LED light will flash rapidly and continuously (button A is still holding) which indicates that the code has been cleaned up.
4. Release the button A and now you have successfully cleared the code.

TO CLONE:

1. Take the original remote control in one hand and Clone Remote Control on the other. Keep the two remote controls as close as possible.
2. Press the first keys of the two remote controls altogether and you should see the LED light will flash 2 times and then slowly flash 3 times.
3. You have now successfully cloned that button now uses the same method to copy the rest of the keys.